Archive for May, 2010

Pneumatic Power Motors

Air pressure (psig or bars) at motor location. 2. Pipe size of air supply system to assure adequate volume (cfm or m3/min) so as to minimize line loss (air pressure drop during motor operation). 3. Plant air system pressure may vary during the day due to use by other equipment; therefore, base the selection of [...]

15 May 2010 at 17:50 - Comments

Regulation of Coal Polymer Degradation

Many of the procedures used in studies described herein were described in previous quarterly reports. The methods and materials described below refer mainly to experiments involving the use of leonardite or solubilized leonardite as a substrate for methanogenesis.(chemistry) http://www.almohandes.org/upload/110M98059410.rar

15 May 2010 at 17:49 - Comments

Energy auditing and recovery for dry type cementrotary kiln systems

This paper deals with the energy audit analysis of a dry type rotary kiln system working in a cement plant in Turkey. The kiln has a capacity of 600 ton-clinker per day. It was found that about 40% of the total input energy was being lost through hot flue gas (19.15%),cooler stack (5.61%) and kiln [...]

15 May 2010 at 17:49 - Comments

thermal decomposition of serpentine of thermal treatment

thermal decomposition of serpentine of thermal treatment Serpentine, Mg3Si2O5(OH)4, is a suitable raw material for the production of high-purity magnesium oxide and silica. The thermal decomposition of serpentine from the region of Ljeskovac http://www.almohandes.org/upload/695hrsak.rar

15 May 2010 at 17:48 - Comments

Bioremediation of oil by marine microbial mats

Given favorable environmental conditions, all natural organic compounds degrade. If any organic compound produced in the ecosphere were inherently resistant to recycling, huge deposits of this material would have accumulated throughout the geological ages. Substantial organic deposits, such as fossil fuels, http://www.almohandes.org/upload/85205Cohen.rar

15 May 2010 at 17:47 - Comments

Project Cost Control: The Way it Works

In a recent consulting assignment we realized that there was some lack of understanding of the whole system of project cost control, how it is setup and applied. So we decided to write up a description of how it works. Project cost control is not that difficult to follow in theor http://www.almohandes.org/upload/552cost_control.rar

15 May 2010 at 17:45 - Comments

cost control

Cutting costs is the simplest way to improve your bottom line. Introducing a cost control system can bring immediate savings and ensure that you remain competitive in the longer term. http://www.almohandes.org/upload/711st2cost.rar

15 May 2010 at 17:44 - Comments

Electrical Characterization of N-Type Gallium Nitride Grown

Gallium nitride and related alloys are wide bandgap materials attractive for high temperature, high power and high frequency electronic applications. Although great achievements have been made in optoelectronic devices, there is an incomplete understanding of the basic material properties. In a highly defective materials system such as this, proper assessment of the electrical parameters is [...]

15 May 2010 at 17:43 - Comments

Air-Source Heat Pumps

var gaJsHost = ((“https:” == document.location.protocol) ? “https://ssl.” : “http://www.”); document.write(unescape(“%3Cscript src=’” + gaJsHost + “google-analytics.com/ga.js’ type=’text/javascript’%3E%3C/script%3E”)); try { var pageTracker = _gat._getTracker(“UA-6181628-2″); pageTracker._trackPageview(); } catch(err) {} At selecting a new heat pump, you have to determine the proper size which is needed for your home. and to put in your mind the following the [...]

15 May 2010 at 17:16 - Comments

Road Construction and Maintenance Workers

var gaJsHost = ((“https:” == document.location.protocol) ? “https://ssl.” : “http://www.”); document.write(unescape(“%3Cscript src=’” + gaJsHost + “google-analytics.com/ga.js’ type=’text/javascript’%3E%3C/script%3E”)); try { var pageTracker = _gat._getTracker(“UA-6181628-2″); pageTracker._trackPageview(); } catch(err) {} Road construction and maintenance workers, like so many workers in other industries, are exposed to numerous hazards on the job.This fact sheet will draw attention to some of [...]

15 May 2010 at 17:15 - Comments