Pneumatic Power Motors
Air pressure (psig or bars) at motor location.
2. Pipe size of air supply system to assure adequate
volume (cfm or m3/min) so as to minimize line loss
(air pressure drop during motor operation).
3. Plant air system pressure may vary during the day
due to use by other equipment; therefore, base the
selection of the air motor on the lowest psig or bars
that can be expected. Then, by using a pressure
regulator in the line at the motor, a uniform air supply
is assured
http://www.almohandes.org/upload/466SP-104_EN.rar
Related posts:
- DC Motors
- Synchronous Machines
- transformerless power supply
- mechanical properties and factors of safety of spider draglines
- Transformerless Power Supplies: Resistive and Capacitive
Categories: Mechanics
