Posts Tagged 'Cooling'

Choosing a cooling system

Choosing a cooling system Do you dread the thought of enduring another sweltering summer of sleepless nights? Can you no longer bear living in a hot box and want to install a cooling system but don’t know where to start? This brochure outlines various cooling options to help you choose the most effective system for your needs. If you [...]

13 August 2009 at 21:52 - Comments

evaporation cooling

evaporation cooling Evaporating water to reduce air temperature and increase air humidity. This process occurs when heat in the air is trans- ferred to the water, causing it to evaporate. Examples: •Sweating/Perspiring •“Swamp Coolers” •Outdoor Misters Download

VN:F [1.2.3_620]please wait…Rating: 0.0/10 (0 votes cast)

13 August 2009 at 21:52 - Comments

How to Burp Your Car’s Cooling System

Things You’ll Need: Engine Coolants Step1Add a mixture of one-half water and one-half antifreeze to the radiator. Fill it right up to the top. Step2Fill the overflow/coolant reservoir with the same 50/50 mixture. Step3Leave the radiator cap off, turn the engine on and let it run until the radiator “burps”: You will see the coolant level drop and [...]

26 June 2009 at 18:17 - Comments

Pressure Cap of Car Cooling Systems

The radiator cap actually increases the boiling point of your coolant by about 45 F (25 C). How does this simple cap do this? The same way a pressure cooker increases the boiling temperature of water. The cap is actually a pressure release valve, and on cars it is usually set to 15 psi. The [...]

25 June 2009 at 17:33 - Comments
I have been looking looking around for this kind of information. Will you post some more in future? I'll be ...
6 July 09 at 21:51

Radiator of Car Cooling Systems

A radiator is a type of heat exchanger. It is designed to transfer heat from the hot coolant that flows through it to the air blown through it by the fan. Most modern cars use aluminum radiators. These radiators are made by brazing thin aluminum fins to flattened aluminum tubes. The coolant flows from the [...]

25 June 2009 at 17:32 - Comments

Engine of Car Cooling Systems

Note that the walls of the cylinder are quite thin, and that the engine block is mostly hollow The engine block and cylinder head have many passageways cast or machined in them to allow for fluid flow. These passageways direct the coolant to the most critical areas of the engine. Temperatures in the combustion chamber of [...]

24 June 2009 at 22:34 - Comments

Water Pump of Car Cooling Systems

The water pump is a simple centrifugal pump driven by a belt connected to the crankshaft of the engine. The pump circulates fluid whenever the engine is running. A centrifugal pump like the one used in your car The water pump uses centrifugal force to send fluid to the outside while it spins, causing fluid to be [...]

24 June 2009 at 22:29 - Comments